The 8 DMX ports can all be configured as in or outputs:
Configured as input: normal or backup mode
Configured as output: single, LTP, HTP, RDM or zero mode
Multiple pre-defined routing options (modes) available:
4 DMX inputs with 4 local clone outputs DMX and ArtNet output
8 DMX outputs from ArtNet input, with “Backup line" possibilities
Different merger combinations in both directions:
Combine DMX in + ArNet universe to Artnet or a physical DMX output (LTP or HTP)
Combine 2 DMX inputs to ArtNet (LTP or HTP)
Multiple mode DMX splitter modes:
One 1 to 7 splitter: 1 DMX input to 7 isolated DMX outputs
Two individual 1 to 3 splitters: each with 1 DMX input to 3 isolated DMX outputs
On top of the pre-defined modes you can also store all your personal settings and routing options to the different user memories.
100% electrical isolation between all in/outputs: problems on 1 port will not influence the other ports.
Easy setup with OLED display
Frame rate of each port can be adapted from 10ms to 40ms to increase compatibility while connecting “slow" DMX-devices to “fast" DMX-controllers.
All DMX ports are equipped with 5pin XLR-connectors (3pin XLR-version available)
Two 10/100Mbps Ethernet ports (Neutrik RJ45 Ethercon connectors)
To increase reliability the built-in Ethernet switch has an
automatic bypass function to make sure that the network stays fully operational in case of hardware failure.
General : Dimensions (cm) |
48.3 x 4.4 x 15 cm |
General : Weight (kg) |
2.92 |
General : Powerinput |
AC 100 - 240V, 50/60Hz |
General : Energy Label |
No |
General : Power consumption W |
7 |
General : Color |
black |
General : Display |
LED |
General : Fixation |
19" rack mountable |
General : RU |
1U |
General : IP rating |
indoor |
Control : programmable |
No |
Control : upgradable software |
No |
Control : maximum DMX channels |
8 |
Connections : input |
3 pin XLR, IEC, artnet, RJ45 |
Connections : output |
3 pin XLR, artnet, RJ45 |