Power supply
Protections
Fully protected circuit design with:
General
Loudspeaker system configuration
Alarms and GPI/O
Remote Control & Monitoring
Number of channels | 2 | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Output power | Single channel mode | Distributed line* | Bridge mode | |||||||||||||||||||||
2 Ω | 4 Ω | 8 Ω | 70V | 100V | 4 Ω | 8 Ω | ||||||||||||||||||
3000 W | 2400 W | 1250 W | 2400 W | 2400 W | 6000W | 4800W | ||||||||||||||||||
Max output voltage / current | 142 Vpeak / 80 Apeak | |||||||||||||||||||||||
AC Main Power | ||||||||||||||||||||||||
Power supply | Universal, regulated switch mode with PFC | |||||||||||||||||||||||
Nominal power requirement | 100-240 V ±10%, 50-60 Hz | |||||||||||||||||||||||
Operating voltage | 60 V - 264 V | |||||||||||||||||||||||
Power consuption** | 115 V | 230 V | ||||||||||||||||||||||
Idle | 30.3 W | 0.34 A | 31.0 W | 0.32 A | ||||||||||||||||||||
1/8 of max output power @ 4 Ω | 777 W | 7.0 A | 753 W | 3.9 A | ||||||||||||||||||||
Thermal | ||||||||||||||||||||||||
Operating temperature range | 0° - 45° C - 32° - 113° F | |||||||||||||||||||||||
Thermal dissipation** | 115 V | 230 V | ||||||||||||||||||||||
Idle | 103 BTU/h | 26.0 kcal/h | 106 BTU/h | 26.7 kcal/h | ||||||||||||||||||||
1/8 of max output power @ 4 Ω | 606 BTU/h | 152.7 kcal/h | 522 BTU/h | 131.5 kcal/h | ||||||||||||||||||||
AUDIO | ||||||||||||||||||||||||
|
||||||||||||||||||||||||
Frequency response | 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω or (±2.5 dB) @ 32W, 70V lines / 65 W, 100V lines | |||||||||||||||||||||||
S/N ratio | > 111 dB (20 Hz - 20 kHz, A weighted) | |||||||||||||||||||||||
Crosstalk separation | <70 dB @ 1kHz | |||||||||||||||||||||||
THD+N | < 0.1% from 0.1 W to full power (typically <0.05%) | |||||||||||||||||||||||
IMD | < 0.05% from 0.1 W to full power (typically <0.05%) | |||||||||||||||||||||||
Input impedance | 20 kΩ balanced | |||||||||||||||||||||||
Slew rate | > 50 V/μs @ 8Ω, input filter bypassed | |||||||||||||||||||||||
Damping factor | > 500 @ 20-100 Hz (Lo-Z) | |||||||||||||||||||||||
Front panel | ||||||||||||||||||||||||
Indicators and Controllers | 1 x LED - Status 1 x LED - Over-temperature protection 1 x LED bar - Signal level + CLIP 1 x LED bar - Signal level and over-temperature protection 1 x Knob - Level attenuator (continuous) 1 x Push-button - Setting operating parameters 1 x Push-button - Preset selector 1 x DIP switch - Toggle energy save on/off per channel pair 1 x Power switch - |
|||||||||||||||||||||||
Connectors | ||||||||||||||||||||||||
AC main | 1 x IEC C20 connector - 20 A max (region-specific power cord provided) | |||||||||||||||||||||||
Audio signal input | 2 x 3 pin Phoenix MC 1.5/3-ST-3.81 - Signal input – MAIN | |||||||||||||||||||||||
Alarm | 1 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Alarm connector | |||||||||||||||||||||||
Remote command | 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Remote on/off switch and aux voltage | |||||||||||||||||||||||
Network/data | 1 x USB plug - USB connection 1 x Rj45 socket - RS485 data connection (non-DSP version) 1 x Rj45 socket - DANTE® |
|||||||||||||||||||||||
Rear panel | ||||||||||||||||||||||||
Indicators and Controllers | 1 x DIP switch - Toggle lo/hi impedance connection 1 x DIP switch - Toggle 70V/100V distributed line nominal voltage 1 x DIP switch - Toggle High Pass Filter 1 x DIP switch - Toggle 35Hz/70Hz HPF cutting frequency |
|||||||||||||||||||||||
Audio | ||||||||||||||||||||||||
Amplifier | Highly efficient Powersoft Class D circuitry | |||||||||||||||||||||||
Communication | ||||||||||||||||||||||||
Wired | Ethernet 100 Mbit/s, PoE, via internal RJ45 port | |||||||||||||||||||||||
Construction | ||||||||||||||||||||||||
Dimensions (L x H x W) | 483 mm x 44.45 mm x 360 mm (19.0 in x 1.8 in x 14.2 in) | |||||||||||||||||||||||
Weight | 7 kg (15.4 lb) |